|
Pressure transmitter explosion proof
Model E-10, standard version
Model E-11, flush diaphragm
Applications
- Wellhead monitoring
- Refining / Petrochemical
- Offshore platforms / pipelines
- Gas measurement
Special Features
- FM-approved Explosion proof for Class I
Division 1 hazardous locations
- ATEX-approved Flameproof for II 2G Ex d II C
- Available with 4 ... 20 mA, 2-wire or 1 ... 5 V,
3-wire output signals
- Engineered to meet harsh demands
- Retrofits many existing applications
|
left: E-10 with ATEX, 1/2 NPT conduit with flying leads, G1/2 B
center: E-10 with FM, CSA, 1/2 NPT male conduit with open wires, 1/2 NPT
right: E-11 with FM, CSA, flying leads, G1/2 B flush diaphragm
|
|
Description
|
|
|
|
The Types E-10 and E-11 explosion proof / flameproof pressure transmitters are specifically designed to meet the durability and performance requirements of industrial applications.
These pressure transmitters feature an industry standard 4 ... 20 mA, 2-wire signal output (optional signal output 1 ... 5 V), NEMA 4X (IP 67) ingress protection, and are extremely resistant to vibration, moisture instrusion and pressure spikes.
They are applicable for acid gas apllications and therefore they provide extra resistance against sulfide stress cracking when exposed to gases containing sulphur.
|
The transmitters are engineered to meet Class I Division 1 Explosion proof protection according to FM, CSA or II 2 G Ex d II C according to ATEX for installation in hazardous environments.
Each transmitter undergoes extensive quality control testing and calibration to achieve an accuracy of < 0.5 %. In addition, each pressure transmitter is temperature compensated to assure accuracy and long term stability when exposed to severe ambient temperature variations.
|
|
|
|
|
|
|
|