|
Cut to Length Thermocouple Sensor
Type TC45
|
Applications
- Automotive industries
- Chemical and petrochemical industries
- Energy and power plant technology
- Heating, ventilation, air-conditioning
- Machinery, plant and tank measurement
- Plastics and rubber industries
- Power and utilities
- Pulp and paper
- Water and wastewater treatment
Special Features
- Fast delivery and a low cost solution when minimum downtime of the process is essential.
- The thermocouple sensor is supplied with 316/316L stainless steel sheath material.
- Sensor diameters are available in 3/16 & 1/4 inch and 4 & 6 mm.
- Temperature range of the sensor is -58°F to +482°F for PTFE insulated lead wire and -58°F to +842°F for fibreglass lead wire.
- When selected, the stainless steel tubing extension can be attached to the thermocouple using a roll-crimp or supplied separately.
- A fiberglass jacket is available for situations where vibration is present or extra protection for the sensor is required.
|
Cut to Length Thermocouple Sensor Type TC45
|
|
Specifications
|
|
| Sensor Element: |
|
Type K (NiCr-Ni), |
| |
|
Type J (Fe-CuNi), |
| |
|
Type E (NiCr--CuNi), |
| |
|
Type N (NiCrSi-NiSi), |
| |
|
Type T (Cu-CuNi) |
| |
|
|
| Temperature range: |
|
-58°F to +842°F (depending upon element) |
| |
|
|
| Number of sensors: |
|
2-wire single circuit |
| |
|
|
| Classification tolerance: |
|
Class 2 and Class 1 per DIN EN 60584 |
| |
|
ISA standard and special to ANSI MC96.1-1982 |
| |
|
|
| Measuring point: |
|
Ungrounded or grounded |
| |
|
|
| Tip construction: |
|
General purpose |
| |
|
|
| Sheath material: |
|
Stainless steel 316 / 316L |
| |
|
|
| Termination: |
|
Stripped leads |
| |
|
|
| Options: |
|
Lengths and diameters standard or customer specific |
| |
|
Calibration - single point and multiple points |
| |
|
Material traceability of the thermocouple alloys, metal sheath and mineral insulation |
| |
|
Selectable accuracy tolerance |
|
|
|