NewModels DMA, DME

Utility feed header

From forged bar stock or seamless pipe

Selected documents
Sales contact

WIKA Instruments Ltd.

Tel.:
+64 9 847 9020
Fax:
+64 9 846 5964
info.nz@wika.com

Applications

Utility distribution networks (e.g. nitrogen, instrument air, cooling water)


Special features

  • Galvanised carbon steel
  • Optionally with hot-formed caps, no RX test required
  • Optionally with condensate drain and fastening clamps

Description

Model DMA
As standard, the model DMA is manufactured from galvanised carbon steel. The inlet connection is made from
forged bar stock.

For the connections, various thread sizes and thread types are available.

For the special version with hot-formed caps there is no RX test required.

Model DME
As standard, the model DME is manufactured from galvanised carbon steel. Its body is made from seamless
pipe (Ø 1"1/2 schedule 80).

The inlet connection consists of a combinable 1½" female thread. The tappings and the condensate drain have a ¼" male thread. For the thread type, several options are available.

The model DME is supplied completely with end cap and coupling, 1 ½" schedule 3000.

The different versions can be combined with each other, so that the number of tappings can be increased as required. If, for example the model DME5 (5 tappings) is combined with the model DME7 (7 tappings), the number of tappings can be increased to 12.

For the special version with hot-formed caps there is no RX test required.

Utility feed header
  • Utility feed header
Wish list - Documents (0)

There are currently no documents on your wish list. You can add any document from the download area to your wish list. To do this, select the desired language using the flag symbol.

The maximum number of 20 entries was reached.

To receive your download link via e-mail, enter your address here:

The e-mail address is invalid.