Filling and handling equipment for SF6 gas are the central tools for the maintenance of gas-insulated equipment. For both installation and maintenance, WIKA supplies the complete product spectrum of efficient service equipment, starting from simple filling carts up to complex, fully automated all-in-one solutions.

Furthermore, the instruments support the plant operator with the recording of the SF6 gas volumes and emissions, as is prescribed in the F-gas regulation (EU), No. 517/2014, for specified equipment.

Sales contact

WIKA Instruments Ltd.

Tel.:
+64 9 847 9020
Fax:
+64 9 846 5964
info.nz@wika.com

FAQ

Why must special equipment be used for SF6 gas?

SF6 gas is a climate-damaging greenhouse gas. 1 kg of SF6 gas corresponds to approx. 23 tonnes of CO2. For this reason, leakage into the atmosphere must be avoided and the use of special equipment is mandatory. Due to the design and ... More

What is the difference between a vacuum pump and vacuum compressor?

A vacuum pump is used to evacuate a gas compartment from air. In contrast, a vacuum compressor in the SF6 recovery process ensures an initial pressure of greater than 1 bar at the SF6 compressor and thus enables a residual pressure in the gas ... More

Wish list - Documents (0)

There are currently no documents on your wish list. You can add any document from the download area to your wish list. To do this, select the desired language using the flag symbol.

The maximum number of 20 entries was reached.

To receive your download link via e-mail, enter your address here:

The e-mail address is invalid.