Thermometers with switch contacts

Wherever the process temperature has to be indicated locally and, at the same time, limit values must be monitored, thermometers with switch contacts find their application. The switch contacts make or break the circuit dependent upon the pointer position of the indicating measuring instrument. If the reading is significantly above or below a set value, they trigger an alarm, hence also the term “alarm contact”. The instruments are also suitable for starting, stopping or switching processes.

Sales contact

WIKA Instruments Ltd.

Tel.:
+64 9 847 9020
Fax:
+64 9 846 5964
info.nz@wika.com

FAQ

What is the maximum permissible temperature for thermowells?

The maximum temperature depends on the materials used and the standards which must be met.  So, for example, a standard stainless steel can be used in air up to about +900 °C, the maximum operating temperature is approximately +600 °C and an approval c ... More

When does one use a gas actuated thermometer with capillary?

Gas-actuated or expansion thermometers with capillaries are used in locations which are not easily accessible and where long distances have to be bridged. As a protective coating for capillaries, a flexible spiral protective sleeve or PVC coating is available.

Wish list - Documents (0)

There are currently no documents on your wish list. You can add any document from the download area to your wish list. To do this, select the desired language using the flag symbol.

The maximum number of 20 entries was reached.

To receive your download link via e-mail, enter your address here:

The e-mail address is invalid.